The TJA1080 is a FlexRay transceiver, which is compatible with the FlexRay electrical physical layer specification V2.1 Rev. A (see Ref. 1). It is primarily intended for communication systems from 1 Mbit/s to 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network. The TJA1080 can be configured to be used as an active star transceiver or as a node transceiver. The TJA1080 provides differential transmit capability to the network and differential receive capability to the FlexRay controller. It offers excellent EMC performance as well as high ESD protection. The TJA1080 actively monitors the system performance using dedicated error and status information (readable by any microcontroller), as well as internal voltage and temperature monitoring. The TJA1080 supports the mode control as used in Philips TJA1054 (see Ref. 2) and TJA1041 (see Ref. 3) CAN transceivers.

88E1111 Ethernet Transceiver Marvell Alaska

RF Transceiver Design for MIMO Wireless Communications

赛林思公司V5 FPGA芯片GTP收发器设计用户手册

LIN收发器库（TJA1020） 通过TJA1020收发器使用LIN总线需要处理状态机，否则您将能够从总线发送或接收数据。 这被封装在此类中。 依存关系 该库扩展了Lin-Interface库： : 例子 看一下基本示例。 库应该像Lin-Interface库一样工作，但是在每个readFrame和writeFrame方法中都要考虑状态机。 您还可以控制状态机，例如。 默认的坡度模式。 # include " TJA1020.hpp " # define LIN_SERIAL_SPEED 19200 # define lin_NSLP_Pin 32 // RX and TX Pin is defined per UART_nr TJA1020 LinBus ( 2 , LIN_SERIAL_SPEED, lin_NSLP_Pin); // U

STM32例程Tutorial 24 - NRF24L01 Radio Transceiver.7z

Altera 公司 高速收发器 Transceiver 物理层 PHY IP核 IP Core 使用手册User Guide 非常详细。

This specification defines a 28 Gb/s QSFP+ pluggable transceiver solution popularly known as QSFP28. It gathers the appropriate/unique Base Electrical, Optical, Common Management, Module/Plug Formfactor, Host connector and cage specifications into a clearly delineated solution for users.

TJA1050 CAN 收发芯片

Wireless Body Area Network (WBAN) and Mobile Health(M-Health, namely e-health or wearable health) monitoring system have become more than just buzzwords in recent years. This paper reviews the state-of-art WBAN channel and addresses wireless communication chip design challenges f