FPGA FMC 板卡ASP-134486-01，ASP-134488-01连接器Concept HDL原理图及PCB封装，Allegro 版本: 16.6 083。
2021-09-10 15:44:02
7.6MB
1
This standard describes FMC IO modules and introduces an electro-mechanical standard
that creates a low overhead protocol bridge. This is between the front panel IO, on the
mezzanine module, and an FPGA processing device on the carrier card, which accepts
the mezzanine module.
2021-09-03 14:25:25
1.11MB
1
ANSI\VITA 57.1_2008 /Revisions Under Consideration
2021-09-02 11:55:20
2.02MB
1
Abstract
The OpenVPX System Specification was created to bring versatile system architectural
solutions to the VPX market. Based on the extremely flexible VPX family of standards, the
OpenVPX standard uses module mechanical, connectors, thermal, communications protocols,
utility, and power definitions provided by specific VPX standards and then describes a series
of standard profiles that define slots, backplanes, modules, and Standard Development
Chassis.
2021-08-31 16:03:52
5.82MB
1
ANSI/VITA 61.0-2011 (R2014) XMC 2.0 英文原版官方规范 R2014
Approved: November 2011
Reaffirmed: August 2014
一级目录
1 Introduction
2 Compliance
4 Carrier Board
5 XMC Connector, VITA 61
6 Identification
7 Compatibility Issues
2021-08-19 18:13:05
1.45MB
1
VITA46美国国家标准学习-V0_1.pdf
VITA46美国国家标准学习-V0_1.pdf
2021-08-09 10:34:38
5.23MB
1