按照LTE标准，利用itpp库编写的上行链路仿真程序，包括各个发射和接收模块 按照LTE标准，利用itpp库编写的上行链路仿真程序，包括各个发射和接收模块

Reselection 1. Priority setting 2. Reselection strategy 3. Signaling and parameter Redirection 1. Flow chart 2. Feature and parameter 3. Signaling flow 4. Structure chart and interface

现编的基于omnet++的LTE安全认证协议原代码。已经仿真成功了。

This book presents the technical characteristics of the two radio network interfaces of mobile 4G, LTE and LTE Advanced, based on Release 8, 9 and 10 of the 3GPP specifications.Points covered include a detailed description of various components of the radio interface. RRC signaling messages used to establish the connection, enabling the security, the paging, the establishment and the release of dedicated and default support and the handover. The PDCP ensures the security of the transmission and allows the recovery during handover and the compression of the headers. The RLC protocol defines the transmission modes with or without acknowledgment. The MAC protocol determines the random access, the data transfer, the timing advance, the scheduling and the discontinuous reception. The physical layer includes a description of the methods of multiplexing (time, frequency and space) and the various signals and physical channels.Download from NitroFlare ,解压密码 share.weimo.info

描述如何解密nas消息。lte系统中的。

一张完整的LTE拓扑图，文件很清晰，可以缩放后打印

用于LTE上行共享信道PUSCH解调参考信号生成及资源映射 无线通信系统程序

EC200S 是移远通信近推出的LTE Cat 1 无线通信模块，支持下行速率10Mbps 和上行速率5Mbps，具有超高的性价比；同时在封装上兼容移远通信多网络制式LTE Standard EC2x（EC25、EC21、EC20 R2.0、EC20 R2.1）和EC200T/EG25-G/EG21-G 模块以及UMTS/HSPA+ UC20/UC200T 模块，实现了3G 网络与4G 网络之间的无缝切换。

GSA2019年1月报告：亚太地区LTE及5G最新发展情况.pdf

LTE(Long Term Evolution,长期演进)项目是3G的演进，始于2004年3GPP的多伦多会议。LTE并非人们普遍误解的4G技术，而是3G与4G技术之间的一个过渡，是3.9G的全球标准,它改进并增强了3G的空中接入技术，采用OFDM和MIMO作为其无线网络演进的唯一标准。在20MHz频谱带宽下能够提供下行326Mbit/s与上行86Mbit/s的峰值速率。改善了小区边缘用户的性能，提高小区容量和降低系统延迟。