很好的FOC介绍文档，在结合英飞凌单片的平台，具有很强的实践意义（XC886/888 CM/CLM 8-Bit Flash Microcontroller Sensorless Field Oriented Control for PMSM Motors.pdf）

840Dsl_应用_力矩电机驱动的旋转工作台刹车装置控制方案

一种新能源汽车热管理控制方案与开发策略.pdf

凌阳公司的文档，介绍直流无刷电机控制原理，清晰，非常有参考价值，看完之后对直流无刷电机的驱动控制原理应该基本清楚

Abstract ——This article deals with a phase-locked loop (PLL)- based novel control for wind turbine driven doubly fed induction generator interfaced to utility grid with a battery energy storage (BES) connected at the dc link. The control of grid-side converter (GSC) is modified to export/import constant power to/from the grid. The state of charge of BES helps in deciding the reference export power to the grid apart from the manual selection using averaged wind power in a particular period of time. An off maximum power point tracking logic is incorporated in the rotor-side converter (RSC) control to operate the BES within its constraints and, moreover, to feed constant power to the grid. In addition, the energy management scheme of the system is presented in the form of flowchart for both exporting and importing power to/from the grid. The RSC and GSC have taken care of unity power factor operation at stator terminals and to mitigate harmonics and grid currents balancing, respectively. The system performance is found robust as the PLL response is not affected even under grid voltages with dc offset. The system is modeled and simulations are carried out in MATLAB using SimPowerSystems tool box. Moreover, the control scheme performance is compared with conventional control algorithms both in terms of PLL and converter controls. To validate the effectiveness of the control scheme, a prototype of the system is developed. Test results demonstrate the satisfactory performance of the system under various operating conditions.

Abstract——Injection of the wind power into an electric grid affects the power quality. The performance of the wind turbine and thereby power quality are determined on the basis of measurements and the norms followed according to the guideline specified in International Electro-technical Commission standard, IEC-61400. The influence of the wind turbine in the grid system concerning the power quality measurements are-the active power, reactive power, variation of voltage, flicker, harmonics, and electrical behavior of switching operation and these are measured according to national/international guidelines. The paper study demonstrates the power quality problem due to installation of wind turbine with the grid. In this proposed scheme STATic COMpensator (STATCOM) is connected at a point of common coupling with a battery energy storage system (BESS) to mitigate the power quality issues. The battery energy storage is integrated to sustain the real power source under fluctuating wind power. The STATCOM control scheme for the grid connected wind energy generation system for power quality improvement is simulated using MATLAB/SIMULINK in power system block set. The effectiveness of the proposed scheme relives the main supply source from the reactive power demand of the load and the induction generator. The development of the grid co-ordination rule and the scheme for improvement in power quality norms as per IEC-standard on the grid has been presented.

POE PSE端 Si3452 控制器 方案

POE LT4275 90W PD 控制器 方案

完整英文版 IEC 60747-19-1：2019 Semiconductor devices - Part 19-1：Smart sensors - Control scheme of smart sensors（半导体器件 - 第19-1部分：智能传感器 - 智能传感器的控制方案）。IEC 60747-19-1:2019(E)规定了传感器的控制方案，传感器是一种设备或模块，通过采用数字处理单元和传感器与外部终端模块之间的双向通信手段，实现传感功能、数据处理功能和数据输出功能。

智慧方案