基于ISO 11784/5的动物识别标签设计、电子技术,开发板制作交流

电机驱动板 完整设计 包含原理图 PCB bom 电机驱动板 完整设计 包含原理图 PCB bom

一般电热毯有高温、低温两档。使用时，拨在高温档，入睡后总被热醒；拨在低温档，有时醒来会觉得温度不够。这里介绍一种电热毯温控器，它可以把电热毯的温度控制在一个合适的范围。         工作原理：    电路如图所示。图中IC为NE555时基电路。RP3为温控调节电位器，其滑动臂电位决定IC的触发电位V2和阀电位Vf，且V5=Vf=2Vz。220V交流电压经C1、R1限流降压，D1、D2整流、C2滤波，DW稳压后，获得9V左右的电压供IC用。室温下接通电源，因已调V2Vz，V6≥Vf时，IC翻转，3脚变为低电平，BCR截止，电热丝停止发热，温度开始逐渐下降，BG1的ICEO随之逐渐减小，V2、

本设计分享的是ArduPilotMega（APM） 无人机飞控板APM-V2.5全部资料，APM飞控系统是国外的一个开源飞控系统，是市面上最强大的基于惯性导航的开源自驾仪。附件内容提供飞控板 APM-V2.5全部设计资料，包括硬件、固件源码和中文硬件与软件的快速入门指南。ArduPilotMega APM-2.5实物截图: 飞控板 APM-V2.5电路 PCB截图: ArduPilotMegaAPM特性包括: 免费开源固件，支持飞机（"ArduPlane"），多旋翼 (四旋翼, 六旋翼, 八旋翼等), 直升机（"ArduCopter"）和地面车辆（"ArduRover"）! 通过点击式的工具简单设置和上传固件。无须编程！(但是你想搞搞代码的话，可以使用简单的嵌入式编程工具: Arduino) 通过点击式的桌面程序完全的规划任务脚本 可以支持上百个三维航点 使用强大的 MAVLink 协议，支持双向遥测和飞行中控制命令T 多种免费地面站，包括 HK GCS, 支持任务规划，空中参数调整，视频显示，语音合成和完整的带回放的数据记录 跨平台。支持Windows, Mac 和 Linux。在 Windows 下使用图形任务规划设置工具 (Mac 下可用模拟器) 或在任何操作系统下使用命令行界面。三种操作系统上都有可用的地面站程序。基于 Arduino 编程环境，也是完全跨系统的。 自动起飞，降落和特殊的动作命令，例如视频和照相控制 完整支持 Xplane 和 Flight Gear 半硬件仿真 包括继电器，可以触发任何设备，可以根据任务脚本控制

霍尔辛赫煤矿大采高工作面斜长由220 m增加到260 m后,在工作面推进速度保持不变的情况下,工作面生产能力可提升58万t/a。根据刮板输送机生产能力校核,现有刮板输送机的装机功率偏小,不能满足大采高加长工作面上行运输的要求。通过技术经济比较,将现有SGZ-1000/2×855型刮板输送机改造为SGZ-1000/3×855型刮板输送机,投资603.9万元,实现总装机功率为2 565 k W、能够满足260 m长大采高工作面产能3.7 Mt/a的生产需要。

东合信息实验板PWM程序，基于正点原子修改，集成了按键和led灯方便调用

本公司继1553B开发板（基于SOPC平台 NIOS II）产品之后，又推 出一款全新的基于8Bit机的1553B开发学习板产品。本开发学习板以 1553B 总线通讯控制器BU61580S3/BU61581S3 以及8 bit MCU AT80C52 为核心，提供了1553B总线系统全新的学习、开发与设计平台。此平台 提供一路双通道MIL-STD-1553B 总线接口、一路UART 接口、通用的用 户接口、外部宽展ROM以及外部扩展了SRAM等资源。核心控制器件为 AT80C52主控MCU，与1553B协议芯片采取8 bit 缓冲模式连接设计。 本开发学习板同时也提供了一个学习AT80C52的开放式学习平台。 并配有学习1553B 总线协议的开发例程，基于C 语言实现。可变的外部 编程的RT地址。1553B 模块可以配置实现BC、RT以及MT 功 能。变压器 耦合和直接耦合两种耦合方式可选。

WiFi-BL使用说明-基于IoT-6G2C-L工控板.pdf，感觉还不错。

目录 第一篇 Linux 基础 ··············································································1 第 1 章 Linux 操作系统简介 ·································································2 1.1 Linux 内核·····················································································2 1.1.1 简介·······················································································2 1.1.2 特点·······················································································3 1.1.3 内核版本号 ·············································································5 1.1.4 组成部分·················································································6 1.2 Linux 发行版··················································································9 1.3 嵌入式 Linux················································································12 1.3.1 嵌入式 Linux 的特点································································12 1.3.2 嵌入式 Linux 的产品形态··························································12 第 2 章 安装 Linux 操作系统 ·······························································14 2.1 获得 Linux 环境的三种方式·····························································14 2.2 发行版选择和 ISO 下载 ··································································15 2.3 VMware Player 软件·······································································16 2.3.1 下载和安装 ···········································································16 2.3.2 设置虚拟化支持 ·····································································18 2.4 使用现成的虚拟机 ········································································19 2.5 创建和配置虚拟机 ········································································23 2.5.1 创建虚拟机 ···········································································23 2.5.2 虚拟机设置 ···········································································26 2.6 安装 Ubuntu·················································································28 2.6.1 实体机安装前准备 ··································································28 2.6.2 虚拟机安装前准备 ··································································30 2.6.3 正式安装 Ubuntu·····································································32 2.7 初识 Ubuntu·················································································36 2.7.1 Ubuntu 桌面···········································································36 2.7.2 输入法··················································································37 2.7.3 系统设置···············································································37

这是为了练习16*16点阵板写的一个弹球小游戏，算法是自己写的，所以可能作品还不太完美。 一、使用的工具 1.点阵板:七星虫德飞莱的LY-LED16*16BV2.1 2.单片机:STC89C52 LY51-L2c的单片机，晶振是12.000 3.编程软件:Keil 4.调试工具:stc-isp-15xx-v6.86D 5.STC的89c52 USB转串口线驱动 二，主要功能有下 1.显示开始界面 2.消除，并数码管显示分数 3.继续消除 4.结束游戏 5.游戏中可以加速和减速小球 6.消除完全部小球后会显示笑脸 三、规则 开始、结束、胜利中使用s4作为确认键 开始游戏后按键功能如下 1.s1 左移 2.s2 右移 3.s3 减速 4.s4 加速 四、缺点 1.要消除完一整行之后才能消除下一行 2.挡板的和球的反弹有点问题 3.分享出来，有想法的可以自己改了来获得更完美的作品。