友善之臂 Tiny6410 串口Demo
【友善之臂 Tiny6410 串口Demo】是一个基于友善之臂开发板Tiny6410的串行通信示例程序。友善之臂是一家知名的嵌入式系统开发工具提供商，他们的Tiny6410开发板是一款基于Samsung S3C6410处理器的平台，常用于教学、实验和产品原型设计。串口（Serial Port）是计算机硬件的一种接口，用于设备之间的串行通信，其在嵌入式系统中尤其重要，因为它提供了与外部设备如调试器、传感器、GPS模块等进行数据交换的基础。
S3C6410处理器内建多个串行通信接口，如UART（通用异步收发传输器），它支持标准的串行通信协议，如RS-232，可以实现全双工通信。在Tiny6410开发板上，通常会预装Linux或其他实时操作系统（RTOS），串口通信可以通过内核驱动或者用户空间库来实现。
在串口Demo中，开发者可能包含了以下关键知识点：
1. **硬件连接**：你需要了解Tiny6410开发板上的串口引脚定义，如TX（发送）、RX（接收）引脚，并正确连接到如串口终端或逻辑分析仪等外部设备。
2. **初始化配置**：在软件层面，你需要配置串口参数，如波特率（常见的有9600、115200等）、数据位（通常为8位）、停止位（一般为1或2位）、校验位（无、奇偶校验等）。
3. **驱动编程**：在Linux环境下，串口驱动通常作为内核的一部分，但开发者也可以通过`/dev/ttySx`设备文件进行用户空间的读写操作。`open()`、`write()`、`read()`和`close()`是基本的文件操作函数，用于打开、发送数据、接收数据和关闭串口。
4. **示例代码**：`SerialPortTest`可能是实现串口通信的测试代码，可能包括设置串口参数、打开串口、发送和接收数据的示例。通过这个Demo，开发者可以学习如何在实际项目中应用串口通信。
5. **错误处理**：在编程过程中，必须考虑到可能出现的错误，例如设备未找到、无法打开、通信超时等，需要编写相应的错误处理机制。
6. **调试工具**：为了验证串口通信是否正常，通常会用到串口调试助手软件，如Termite、RealTerm等，它们能显示接收到的数据并允许发送测试数据。
7. **多线程与中断**：在复杂的系统中，串口通信可能需要在多线程环境中进行，或者利用中断服务程序来实时响应数据接收事件。
8. **应用示例**：串口通信广泛应用于嵌入式设备的控制、数据采集、远程监控等场景。例如，通过串口控制GPIO（通用输入输出）状态，或者从传感器接收数据。
通过这个串口Demo，开发者可以深入理解串口通信的基本原理和实践技巧，为开发基于Tiny6410的嵌入式应用打下坚实基础。
文件下载
资源详情
[{"title":"（ 50 个子文件 950KB ） 友善之臂 Tiny6410 串口Demo","children":[{"title":"SerialPortTest","children":[{"title":"bin","children":[{"title":"classes.dex <span style='color:#111;'> 570.98KB </span>","children":null,"spread":false},{"title":"res","children":[{"title":"drawable-ldpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 2.12KB </span>","children":null,"spread":false}],"spread":true},{"title":"drawable-hdpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 6.15KB </span>","children":null,"spread":false}],"spread":true},{"title":"drawable-xhdpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 9.85KB </span>","children":null,"spread":false}],"spread":true},{"title":"drawable-mdpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 3.22KB </span>","children":null,"spread":false}],"spread":true}],"spread":true},{"title":"SerialPortTest.apk <span style='color:#111;'> 179.11KB </span>","children":null,"spread":false},{"title":"dexedLibs","children":[{"title":"android-support-v4-dadd650b706ed226b6a3915800b5a8b5.jar <span style='color:#111;'> 146.26KB </span>","children":null,"spread":false},{"title":"annotations-a764dfa84f45e186cc6d0f4a25a67274.jar <span style='color:#111;'> 943B </span>","children":null,"spread":false}],"spread":true},{"title":"classes","children":[{"title":"co","children":[{"title":"liuwei","children":[{"title":"MainActivity.class <span style='color:#111;'> 1.14KB </span>","children":null,"spread":false},{"title":"BuildConfig.class <span style='color:#111;'> 327B </span>","children":null,"spread":false},{"title":"MainActivity$3.class <span style='color:#111;'> 788B </span>","children":null,"spread":false},{"title":"MainActivity$2.class <span style='color:#111;'> 866B </span>","children":null,"spread":false},{"title":"MainActivity$1.class <span style='color:#111;'> 787B </span>","children":null,"spread":false},{"title":"R$layout.class <span style='color:#111;'> 376B </span>","children":null,"spread":false},{"title":"R$id.class <span style='color:#111;'> 467B </span>","children":null,"spread":false},{"title":"R$drawable.class <span style='color:#111;'> 380B </span>","children":null,"spread":false},{"title":"SerialPortCmd.class <span style='color:#111;'> 4.11KB </span>","children":null,"spread":false},{"title":"SerialPortCmd$1.class <span style='color:#111;'> 736B </span>","children":null,"spread":false},{"title":"SerialPortCmd$2.class <span style='color:#111;'> 1.71KB </span>","children":null,"spread":false},{"title":"R$attr.class <span style='color:#111;'> 313B </span>","children":null,"spread":false},{"title":"R$menu.class <span style='color:#111;'> 370B </span>","children":null,"spread":false},{"title":"R.class <span style='color:#111;'> 544B </span>","children":null,"spread":false},{"title":"SerialPortCmd$SendCmdThread.class <span style='color:#111;'> 2.09KB </span>","children":null,"spread":false},{"title":"R$string.class <span style='color:#111;'> 443B </span>","children":null,"spread":false},{"title":"R$style.class <span style='color:#111;'> 404B </span>","children":null,"spread":false}],"spread":false}],"spread":true},{"title":"com","children":[{"title":"friendlyarm","children":[{"title":"AndroidSDK","children":[{"title":"HardwareControler.class <span style='color:#111;'> 1.10KB </span>","children":null,"spread":false}],"spread":true}],"spread":true}],"spread":true}],"spread":true},{"title":"resources.ap_ <span style='color:#111;'> 25.43KB </span>","children":null,"spread":false},{"title":"AndroidManifest.xml <span style='color:#111;'> 833B </span>","children":null,"spread":false}],"spread":true},{"title":"res","children":[{"title":"drawable-ldpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 2.50KB </span>","children":null,"spread":false}],"spread":true},{"title":"menu","children":[{"title":"activity_main.xml <span style='color:#111;'> 212B </span>","children":null,"spread":false}],"spread":true},{"title":"drawable-hdpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 8.02KB </span>","children":null,"spread":false}],"spread":true},{"title":"drawable-xhdpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 13.25KB </span>","children":null,"spread":false}],"spread":true},{"title":"values","children":[{"title":"strings.xml <span style='color:#111;'> 221B </span>","children":null,"spread":false},{"title":"styles.xml <span style='color:#111;'> 679B </span>","children":null,"spread":false}],"spread":true},{"title":"drawable-mdpi","children":[{"title":"ic_launcher.png <span style='color:#111;'> 3.97KB </span>","children":null,"spread":false}],"spread":true},{"title":"layout","children":[{"title":"activity_main.xml <span style='color:#111;'> 839B </span>","children":null,"spread":false}],"spread":true}],"spread":true},{"title":"proguard-project.txt <span style='color:#111;'> 781B </span>","children":null,"spread":false},{"title":"ic_launcher-web.png <span style='color:#111;'> 54.44KB </span>","children":null,"spread":false},{"title":"assets","children":null,"spread":false},{"title":"gen","children":[{"title":"co","children":[{"title":"liuwei","children":[{"title":"BuildConfig.java <span style='color:#111;'> 151B </span>","children":null,"spread":false},{"title":"R.java <span style='color:#111;'> 1.68KB </span>","children":null,"spread":false}],"spread":true}],"spread":true}],"spread":true},{"title":".settings","children":[{"title":"org.eclipse.core.resources.prefs <span style='color:#111;'> 53B </span>","children":null,"spread":false},{"title":"org.eclipse.jdt.core.prefs <span style='color:#111;'> 173B </span>","children":null,"spread":false}],"spread":true},{"title":"src","children":[{"title":"co","children":[{"title":"liuwei","children":[{"title":"MainActivity.java <span style='color:#111;'> 1.11KB </span>","children":null,"spread":false},{"title":"SerialPortCmd.java <span style='color:#111;'> 5.86KB </span>","children":null,"spread":false}],"spread":true}],"spread":true},{"title":"com","children":[{"title":"friendlyarm","children":[{"title":"AndroidSDK","children":[{"title":"HardwareControler.java <span style='color:#111;'> 2.41KB </span>","children":null,"spread":false}],"spread":true}],"spread":true}],"spread":true}],"spread":true},{"title":".project <span style='color:#111;'> 817B </span>","children":null,"spread":false},{"title":".classpath <span style='color:#111;'> 356B </span>","children":null,"spread":false},{"title":"project.properties <span style='color:#111;'> 563B </span>","children":null,"spread":false},{"title":"AndroidManifest.xml <span style='color:#111;'> 833B </span>","children":null,"spread":false},{"title":"libs","children":[{"title":"android-support-v4.jar <span style='color:#111;'> 376.65KB </span>","children":null,"spread":false}],"spread":true}],"spread":false}],"spread":true}]
评论信息
其他资源
- Boost_PI_LTspice.zip
- (中文版)MVO算法详解及其伪代码.docx
- at89c51单片机产生5KHZ方波（c语言编程）
- gpx格式文件转换成KML
- ESXi-6.7.0-20181104001-standard-customized,et55-r8168,sata-xahci.7z.001
- 数电课程设计题目、原理、参考电路
- 组合数学原书 第四版
- 中国石油大学《工程流体力学》期末复习题.pdf
- 安全攻防技术文档DEQ
- Jailer：数据库子集和关系数据浏览工具-源码
- 用Python写的电影推荐系统
- PYQT5与Matplotlib_2019最新参考资料 含程序.rar
- 杭电考博复习矩阵理论试题A.doc
- Wince6.0+C#串口调试助手源码
- 5kW直流电动机不可逆调速系统设计~电力电子课程设计
- ffmpeg转码为hls代码
- Android 课程设计
- win32 游戏界面
- LR预设大师之作大全
- 自己实现linux下ls命令 的两个选项
- unity3d光影插件
- C#酒店管理系统课程设计报告
免责申明
【只为小站】的资源来自网友分享，仅供学习研究，请务必在下载后24小时内给予删除，不得用于其他任何用途，否则后果自负。基于互联网的特殊性，【只为小站】 无法对用户传输的作品、信息、内容的权属或合法性、合规性、真实性、科学性、完整权、有效性等进行实质审查；无论 【只为小站】 经营者是否已进行审查，用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。
本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二条之规定，若资源存在侵权或相关问题请联系本站客服人员，zhiweidada#qq.com，请把#换成@，本站将给予最大的支持与配合，做到及时反馈和处理。关于更多版权及免责申明参见 版权及免责申明
本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二条之规定，若资源存在侵权或相关问题请联系本站客服人员，zhiweidada#qq.com，请把#换成@，本站将给予最大的支持与配合，做到及时反馈和处理。关于更多版权及免责申明参见 版权及免责申明